CHIPNOVA

EN
- Chinese
- English

Product Center

Using IoT technology to help improve the standardization, intelligence and scale of ranching

Home page

Gravity Series In-Situ Holders（Biasing&Double Tilt）

Gravity Series In-Situ Holders（Biasing&Double Tilt）

Gravity Series In-Situ Holders（Biasing&Double Tilt） is used to control the electric field of the sample，combining with EDS，EELS，SAED，HRTEM，STEM and other different modes，The key information such as microstructure evolution，phase transition，elemental valence state，microscopic stress，and surface/interface structure and composition evolution of samples under vacuum environment can be monitored in real time and dynamically at the nano level。

Gravity Series In-Situ Holders（Straining&Single Tilt)

Gravity Series In-Situ Holders（Straining&Single Tilt)

The rod body is made of high strength titanium alloy material to avoid the bending deformation of the rod body during long-term use; The sample rod uses Axis design, built-in high precision reduction gear, stretching step better than 100nm, good straightness of motion. The rectangular opening at the tip of the sample rod has a fastening point at each end, one end is a fixed mounting point, and the other end is a movable cross head, which can securely fix the sample in the corresponding position during the tensile and compression process.

Gravity Series In-Situ Holders（Nano Indentation&Heating&Biasing)

Gravity Series In-Situ Holders（Nano Indentation&Heating&Biasing)

Gravity Series In-Situ Holders（Nano Indentation&Heating&Biasing)applies mechanics, electric field and thermal field to the sample through MEMS chip.The construction of force, electrical, thermal composite multi-field automatic control and feedback in the in-situ sample station Measurement system, combined with EDS, EELS, SAED, HRTEM, STEM and other different modes,realizes real-time and dynamic monitoring of samples in vacuum with temperature, electric field and application at the nano level microstructure evolution, phase transition, elemental valence state, microscopic stress and surface/boundary resulting from afterforce changes Key information such as the structure and composition evolution .

Gravity Series In-Situ Holders(Nano Indentation&Heating)

Gravity Series In-Situ Holders(Nano Indentation&Heating)

Gravity Series In-Situ Holders(Nano Indentation&Heating) was constructed by MEMS chip in the in-situ.Mechanical and thermal composite multi-field automatic control and feedback measurement system, combined with EDS, EELS, SAED,HRTEM, STEM and other different modes can realize real-time and dynamic sample monitoring from the nano level Microstructure evolution, phase change and element change with temperature and applied force in vacuum environment Key information such as prime valence states, microscopic stresses, and structural and compositional evolution at the surface/interface.

Gravity Series In-Situ Holders(Nano Indentation&Biasing)

Gravity Series In-Situ Holders(Nano Indentation&Biasing)

The Gravity Series In-Situ Holders(Nano Indentation&Biasing) was constructed by MEMS chip in the in-situ sample station. Mechanical and thermal composite multi-field automatic control and feedback measurement system, combined with EDS, EELS, SAED,HRTEM, STEM and other different modes can realize real-time and dynamic sample monitoring from the nano level Microstructure evolution, phase change and element change with temperature and applied force in vacuum environment Key information such as prime valence states, microscopic stresses, and structural and compositional evolution at the surface/interface.

< 1 >

CHIPNOVA

免费热线

Tel：

+86 592 666 1220

免费热线

E-mail：

Business docking:

info@chip-nova.com

Exhibition docking:

qiuhuixin@chip-nova.com

Add：

708-01, Kehui Building, No. 3 Zengcuo'an North Road, Software Park, Xiamen Torch High tech Zone

Service Hotline

+86 400-8896-308

Monday to Friday 09:00-18:00

Copyright 2021 CHIPNOVA

Business license